
CCNA & CCNP 证书经验班
COURSE OUTLINE
Class 1: Network Fundamental
- OSI and TCP/IP model
- IP addressing
- TCP and UDP
- Cable and cabling
- Exercise
Class 2: Cisco routers and switches operations
- Cisco routers and switches family
- Architecture of Cisco routers and switches
- Basic router operations: hostname, interface, IP and CDP
- Switch operation and port configuration: hostname, VLAN, interface speed and duplex
- SDM (Security Device Manager)
- Configuration backup and recovery
- IOS upgrade
- Password recovery
- SNMP
- NTP
- Labs
Class 3: Basic Layer 2 technology
- VLAN and VTP
- Trunk
- STP (Spanning tree protocol)
- Frame Relay
- Labs
Class 4: RIP and EIGRP basics
- RIP
- EIGRP
- Labs
Class 5: Advanced EIGRP
- Advanced EIGRP
- EIGRP troubleshooting
- Labs
Class 6: OSPF basics
- Introduction
- DR & BDR election
- Loopback and Router ID
- Configuring OSPF
- Labs
Class 7: ACL and NAT
- ACL
- NAT
- Troubleshooting
- Labs
Class 8: WLAN, IPv6 basics and WAN
- WLAN Concepts
- Configuring Cisco Aironet
- IPv6
- WAN: Cable, DSL, HDLC, PPP and Frame Relay
- Labs
Class 9: Advanced OSPF
- Router and area type
- LSA type
- Virtual Link
- Route summary
- Filtering
- Default routing
- Troubleshooting
- Labs
Class 10: IGP Redistribution
- Route map
- IP prefix-list
- Troubleshooting
- Labs
Class 11: PBR and IP SLA
- PBR
- IP SLA
- Troubleshooting
- Labs
Class 12: BGP Basics
- Introduction
- iBGP and eBGP
- BGP attributes
- Configuring BGP
- Labs
Class 13: Advanced BGP
- Multi-homing
- BGP path control
- Default route inject
- Troubleshooting
- Labs
Class 14: IPv6
- RIPng
- EIGRP for IPv6
- OSPFv3
- IPv4 and IPv6 coexistence
- Labs
Class 15: Advanced Layer 2 and Layer 3 Switch technology
- STP
- Etherchannel: Aggregating switch links
- SVI and routed port
- HSRP, VRRP and GLBP
- Router and supervisor redundancy
- IP Telephony
- Switched network security
- Labs
Class 16: Advanced troubleshooting
- VPN
- Typical enterprise network
- Large enterprise network troubleshooting
- Labs